International Havester Transfer Cases
International Harvester truck fans are big into line setting tickets.
A line setting ticket identifies all the parts that were used to build
the original truck. The line setting ticket uses special IH codes to
identify these parts and this table has been compiled to cross
reference those codes with the manufactures model number. If you
purchase an IH truck it may come with a line setting ticket or you
could still purchase the line setting ticket for your truck. The
line setting ticket may still be in the glove box or behind the
Scout Transfer Cases
|IH Code||Vendor and Model||When Used|
|13143 or TC-143||IH Chain Drive Transfer Case-Single Speed||Scout II|
|13144 or TC-144||Dana Model 18||Scout 80|
|13145 or TC-145||Dana Model 20||Scout 800 and II|
|13146 or TC-146||Dana Model 300||1980 Scout II|
Disclaimer from Howard Pletcher: Years and Models are from memory,
may not be 100% accurate.
IH Dana 300: The
IH Scout II Dana 300 was only used in 1980 and it can be used to
replace Jeep Dana 20 transfer cases. It has a much better low
range than the Jeep Dana 20.
IH Dana 20: The
IH Dana 20 can be used to replace most Jeep Dana 20s.
IH Dana 18: The
IH Dana 18 can be used to replace most Jeep Dana 18s.
Thanks to Howard R Pletcher of
Navistar (formerly part of International) for help with the
International identification codes.
Last modified Wednesday, 01-Dec-2010 08:33:08 MST
Jeep Tech Main Page |
Terry's Jeep Page
Copyright © 2001, 2000, 1999, 1998
All Rights Reserved, All content with exception of private works and
corporate trademarked logos are property of Jeeptech.com